The 1925L touchmonitor, when connected to the newer Dell SX280 computers via the DVI video interface cable, will display a black screen and the computer will not boot. The short-term solution for this problem is to enable the analog pins in the DVI connector by using the alternate cables supplied in both the Elo and Dell boxes.

• Find the DVI-to-VGA cable supplied with the Elo monitor
  • Six foot cable, white DVI connector on one end, blue VGA connector on the other end
• Find the DVI Y-cable supplied with the Dell computer
  • One foot split cable, white DVI connector on one end, blue VGA and white DVI connectors on the other end
• Connect the two blue VGA cables together
• Now connect the white DVI connectors on the ends of the newly constructed cable to the monitor and computer DVI connectors
• Power the system and proceed normally

Elo is investigating and will correct the issue as soon as possible. If you would like Elo to keep you informed of the status of our investigation, please contact Technical Support. Be sure to add "1925L DVI" to the Additional Information field. You will be notified as soon as the long term solution is available.